This layer provides User Datagram Protocol support. It can be placed on top of IP layers.
Parameter | Type | Description |
---|---|---|
Alias | String | |
Debug Log Level | Number | Debug Level |
Dependencies | String | Other dependencies to this element |
Dest Port | Number | |
Destination Peer | Number | |
Event Filter | String | Filter of Event |
Exact Match | Boolean | |
Max Event Queue Size | Number | Maximum Queue Size |
Name | String | Component Name |
No Events | Boolean | |
Passthrough | Boolean | High-to-Low Layer Passthrough |
Port | Number | TCP/UDP Port |
Port Range | Number | TCP/UDP Port Range |
Port Skip | Number | TCP/UDP Port Skip |
Raw Data To Inject | String | Data Packet to Inject |
Raw Dst L2 To Inject | String | Destination L2 Address |
Raw Dst L3 To Inject | String | Destination L3 Address |
Raw Dst L4 To Inject | String | Destination L4 Address |
Request Timeout | Number | |
Save Dynamic Config | Boolean | |
Show Commands | Boolean | Show Commands |
Show Events | Boolean | Show Events |
Watch | Boolean | Watch Layer |
Parameter | Type | Description |
---|---|---|
Allow Blocking Event | Boolean | Blocking Events |
Blocked | Boolean | Disable Component |
Debug Log Level | Number | Debug Level |
OS Transport | Boolean | Force OS based L2/L3 Layers |
Passthrough | Boolean | High-to-Low Layer Passthrough |
Port | Number | TCP/UDP Port |
Port Range | Number | TCP/UDP Port Range |
Port Skip | Number | TCP/UDP Port Skip |
Watch | Boolean | Watch Layer |
Function | Type | Description |
---|---|---|
getStatsUdpAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
getStatsUdpDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
getStatsUdpDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
getStatsUdpMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
getStatsUdpMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
getStatsUdpMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
getStatsUdpMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
getStatsUdpMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
getStatsUdpMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
getStatsUdpName(layer) | getter | Get “Name” Parameter |
getStatsUdpRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
getStatsUdpRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
getStatsUdpTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
getStatsUdpTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
getStatsUdpType(layer) | getter | Get “Type” Parameter |
getStatsUdpUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
getStatsUdpUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
getStatsUdpVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
getStatsUdpVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
getUdpAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
getUdpBlocked(layer) | getter | Get “Blocked” Parameter |
getUdpDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
getUdpDestPort(layer) | getter | Get “Dest Port” Parameter |
getUdpDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
getUdpNoEvents(layer) | getter | Get “No Events” Parameter |
getUdpOSTransport(layer) | getter | Get “OS Transport” Parameter |
getUdpPassthrough(layer) | getter | Get “Passthrough” Parameter |
getUdpPort(layer) | getter | Get “Port” Parameter |
getUdpPortRange(layer) | getter | Get “Port Range” Parameter |
getUdpPortSkip(layer) | getter | Get “Port Skip” Parameter |
getUdpWatch(layer) | getter | Get “Watch” Parameter |
setUdpAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
setUdpBlocked(layer,value) | setter | Set “Blocked” Parameter |
setUdpDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
setUdpDestPort(layer,value) | setter | Set “Dest Port” Parameter |
setUdpNoEvents(layer,value) | setter | Set “No Events” Parameter |
setUdpPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
setUdpWatch(layer,value) | setter | Set “Watch” Parameter |