Sidebar
azure_azure
Table of Contents
Azure Layer (azure)
The Azure helper layer supports Azure IoT Hub functionality. It must be placed on top of an MQTT layer.
Azure Layer Configuration Parameters
| Parameter | Type | Description |
|---|---|---|
| Action | Number | |
| Alias | String | |
| CA Certificate | Number | |
| Client Certificate | Number | |
| Client Private Key | Number | |
| Debug Log Level | Number | Debug Level |
| Dependencies | String | Other dependencies to this element |
| Destination Peer | Number | |
| Device Id | String | |
| Event Filter | String | Filter of Event |
| Exact Match | Boolean | |
| HubName | String | |
| Max Event Queue Size | Number | Maximum Queue Size |
| Name | String | Component Name |
| No Events | Boolean | |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Raw Data To Inject | String | Data Packet to Inject |
| Raw Dst L2 To Inject | String | Destination L2 Address |
| Raw Dst L3 To Inject | String | Destination L3 Address |
| Raw Dst L4 To Inject | String | Destination L4 Address |
| Request Timeout | Number | |
| Save Dynamic Config | Boolean | |
| Show Commands | Boolean | Show Commands |
| Show Events | Boolean | Show Events |
| Topic | String | |
| Watch | Boolean | Watch Layer |
Azure Layer Real-Time Parameters
| Parameter | Type | Description |
|---|---|---|
| Allow Blocking Event | Boolean | Blocking Events |
| Blocked | Boolean | Disable Component |
| Debug Log Level | Number | Debug Level |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Watch | Boolean | Watch Layer |
Azure Layer Functions
| Function | Type | Description |
|---|---|---|
| getStatsAzureAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
| getStatsAzureDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
| getStatsAzureDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
| getStatsAzureMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
| getStatsAzureMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
| getStatsAzureMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
| getStatsAzureMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
| getStatsAzureMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
| getStatsAzureMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
| getStatsAzureName(layer) | getter | Get “Name” Parameter |
| getStatsAzureRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
| getStatsAzureRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
| getStatsAzureTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
| getStatsAzureTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
| getStatsAzureType(layer) | getter | Get “Type” Parameter |
| getStatsAzureUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
| getStatsAzureUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
| getStatsAzureVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
| getStatsAzureVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
| getazureAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
| getazureBlocked(layer) | getter | Get “Blocked” Parameter |
| getazureDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
| getazureDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
| getazureNoEvents(layer) | getter | Get “No Events” Parameter |
| getazurePassthrough(layer) | getter | Get “Passthrough” Parameter |
| getazureWatch(layer) | getter | Get “Watch” Parameter |
| setazureAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
| setazureBlocked(layer,value) | setter | Set “Blocked” Parameter |
| setazureDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
| setazureNoEvents(layer,value) | setter | Set “No Events” Parameter |
| setazurePassthrough(layer,value) | setter | Set “Passthrough” Parameter |
| setazureWatch(layer,value) | setter | Set “Watch” Parameter |
azure_azure.txt · Last modified: 2021/07/26 03:45 by vps