This layer provides timer support. It can be placed on top of any layer.
Parameter | Type | Description |
---|---|---|
Alias | String | |
Debug Log Level | Number | Debug Level |
Dependencies | String | Other dependencies to this element |
Destination Peer | Number | |
Event Filter | String | Filter of Event |
Exact Match | Boolean | |
Max Event Queue Size | Number | Maximum Queue Size |
Name | String | Component Name |
No Events | Boolean | |
Passthrough | Boolean | High-to-Low Layer Passthrough |
Raw Data To Inject | String | Data Packet to Inject |
Raw Dst L2 To Inject | String | Destination L2 Address |
Raw Dst L3 To Inject | String | Destination L3 Address |
Raw Dst L4 To Inject | String | Destination L4 Address |
Request Timeout | Number | |
Save Dynamic Config | Boolean | |
Show Commands | Boolean | Show Commands |
Show Events | Boolean | Show Events |
Timers | String | List of Timers |
Watch | Boolean | Watch Layer |
Parameter | Type | Description |
---|---|---|
Allow Blocking Event | Boolean | Blocking Events |
Blocked | Boolean | Disable Component |
Debug Log Level | Number | Debug Level |
Passthrough | Boolean | High-to-Low Layer Passthrough |
Watch | Boolean | Watch Layer |
Function | Type | Description |
---|---|---|
getStatsTimerAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
getStatsTimerDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
getStatsTimerDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
getStatsTimerMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
getStatsTimerMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
getStatsTimerMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
getStatsTimerMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
getStatsTimerMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
getStatsTimerMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
getStatsTimerName(layer) | getter | Get “Name” Parameter |
getStatsTimerRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
getStatsTimerRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
getStatsTimerTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
getStatsTimerTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
getStatsTimerType(layer) | getter | Get “Type” Parameter |
getStatsTimerUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
getStatsTimerUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
getStatsTimerVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
getStatsTimerVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
getTimerAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
getTimerBlocked(layer) | getter | Get “Blocked” Parameter |
getTimerDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
getTimerDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
getTimerNoEvents(layer) | getter | Get “No Events” Parameter |
getTimerPassthrough(layer) | getter | Get “Passthrough” Parameter |
getTimerWatch(layer) | getter | Get “Watch” Parameter |
setTimerAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
setTimerBlocked(layer,value) | setter | Set “Blocked” Parameter |
setTimerDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
setTimerNoEvents(layer,value) | setter | Set “No Events” Parameter |
setTimerPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
setTimerWatch(layer,value) | setter | Set “Watch” Parameter |
timerAdd(layer,period,event,index,periodc,temp) | function | Add Timer |
timerDelete(layer,event) | function | Remove Timer |
timerGetList(layer) | function | Get List |