Sidebar
quic_quic
Table of Contents
QUIC Layer (quic)
This layer provides both RFC9000: QUIC: A UDP-Based Multiplexed and Secure Transport and Google QUIC transport support. It can be placed on top of UDP layers.
QUIC Layer Configuration Parameters
| Parameter | Type | Description |
|---|---|---|
| Alias | String | |
| Debug Log Level | Number | Debug Level |
| Dependencies | String | Other dependencies to this element |
| Destination Peer | Number | |
| Event Filter | String | Filter of Event |
| Exact Match | Boolean | |
| GQUIC | Boolean | |
| Max Event Queue Size | Number | Maximum Queue Size |
| Name | String | Component Name |
| No Events | Boolean | |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Raw Data To Inject | String | Data Packet to Inject |
| Raw Dst L2 To Inject | String | Destination L2 Address |
| Raw Dst L3 To Inject | String | Destination L3 Address |
| Raw Dst L4 To Inject | String | Destination L4 Address |
| Request Timeout | Number | |
| Save Dynamic Config | Boolean | |
| Show Commands | Boolean | Show Commands |
| Show Events | Boolean | Show Events |
| Watch | Boolean | Watch Layer |
QUIC Layer Real-Time Parameters
| Parameter | Type | Description |
|---|---|---|
| Allow Blocking Event | Boolean | Blocking Events |
| Blocked | Boolean | Disable Component |
| Debug Log Level | Number | Debug Level |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Watch | Boolean | Watch Layer |
QUIC Layer Functions
| Function | Type | Description |
|---|---|---|
| getQuicAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
| getQuicBlocked(layer) | getter | Get “Blocked” Parameter |
| getQuicDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
| getQuicDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
| getQuicGQUIC(layer) | getter | Get “GQUIC” Parameter |
| getQuicNoEvents(layer) | getter | Get “No Events” Parameter |
| getQuicPassthrough(layer) | getter | Get “Passthrough” Parameter |
| getQuicWatch(layer) | getter | Get “Watch” Parameter |
| getStatsQuicAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
| getStatsQuicDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
| getStatsQuicDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
| getStatsQuicMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
| getStatsQuicMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
| getStatsQuicMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
| getStatsQuicMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
| getStatsQuicMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
| getStatsQuicMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
| getStatsQuicName(layer) | getter | Get “Name” Parameter |
| getStatsQuicRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
| getStatsQuicRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
| getStatsQuicTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
| getStatsQuicTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
| getStatsQuicType(layer) | getter | Get “Type” Parameter |
| getStatsQuicUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
| getStatsQuicUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
| getStatsQuicVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
| getStatsQuicVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
| setQuicAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
| setQuicBlocked(layer,value) | setter | Set “Blocked” Parameter |
| setQuicDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
| setQuicGQUIC(layer,value) | setter | Set “GQUIC” Parameter |
| setQuicNoEvents(layer,value) | setter | Set “No Events” Parameter |
| setQuicPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
| setQuicWatch(layer,value) | setter | Set “Watch” Parameter |
quic_quic.txt · Last modified: 2021/07/26 02:15 by vps