Sidebar
aws_aws
Table of Contents
AWS Layer (aws)
The AWS helper layer supports AWS IoT functionality. It must be placed on top of an MQTT layer.
AWS Layer Configuration Parameters
| Parameter | Type | Description |
|---|---|---|
| Action | Number | |
| Alias | String | |
| CA Certificate | Number | |
| Client Certificate | Number | |
| Client ID | String | |
| Client Private Key | Number | |
| Debug Log Level | Number | Debug Level |
| Dependencies | String | Other dependencies to this element |
| Destination Peer | Number | |
| EndPoint | String | |
| Event Filter | String | Filter of Event |
| Exact Match | Boolean | |
| Max Event Queue Size | Number | Maximum Queue Size |
| Name | String | Component Name |
| No Events | Boolean | |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Raw Data To Inject | String | Data Packet to Inject |
| Raw Dst L2 To Inject | String | Destination L2 Address |
| Raw Dst L3 To Inject | String | Destination L3 Address |
| Raw Dst L4 To Inject | String | Destination L4 Address |
| Request Timeout | Number | |
| Save Dynamic Config | Boolean | |
| Show Commands | Boolean | Show Commands |
| Show Events | Boolean | Show Events |
| Topic | String | |
| Watch | Boolean | Watch Layer |
AWS Layer Real-Time Parameters
| Parameter | Type | Description |
|---|---|---|
| Allow Blocking Event | Boolean | Blocking Events |
| Blocked | Boolean | Disable Component |
| Debug Log Level | Number | Debug Level |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Watch | Boolean | Watch Layer |
AWS Layer Functions
| Function | Type | Description |
|---|---|---|
| getStatsAwsAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
| getStatsAwsDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
| getStatsAwsDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
| getStatsAwsMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
| getStatsAwsMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
| getStatsAwsMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
| getStatsAwsMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
| getStatsAwsMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
| getStatsAwsMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
| getStatsAwsName(layer) | getter | Get “Name” Parameter |
| getStatsAwsRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
| getStatsAwsRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
| getStatsAwsTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
| getStatsAwsTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
| getStatsAwsType(layer) | getter | Get “Type” Parameter |
| getStatsAwsUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
| getStatsAwsUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
| getStatsAwsVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
| getStatsAwsVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
| getawsAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
| getawsBlocked(layer) | getter | Get “Blocked” Parameter |
| getawsDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
| getawsDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
| getawsNoEvents(layer) | getter | Get “No Events” Parameter |
| getawsPassthrough(layer) | getter | Get “Passthrough” Parameter |
| getawsWatch(layer) | getter | Get “Watch” Parameter |
| setawsAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
| setawsBlocked(layer,value) | setter | Set “Blocked” Parameter |
| setawsDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
| setawsNoEvents(layer,value) | setter | Set “No Events” Parameter |
| setawsPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
| setawsWatch(layer,value) | setter | Set “Watch” Parameter |
aws_aws.txt · Last modified: 2021/07/26 03:43 by vps