Sidebar
lora_lora
Table of Contents
LoRa Layer (lora)
This layer provides LoRa support. It can be placed on top of a physical layer that supports LoRa.
LoRa Layer Configuration Parameters
| Parameter | Type | Description |
|---|---|---|
| Address | Number | Ethernet/IPv4/IPv6 Address |
| Alias | String | |
| Bandwidth | Number | |
| Coding Rate | Number | |
| Debug Log Level | Number | Debug Level |
| Dependencies | String | Other dependencies to this element |
| Dest Address | Number | |
| Destination Peer | Number | |
| Event Filter | String | Filter of Event |
| Exact Match | Boolean | |
| ISM Band | Number | |
| Max Event Queue Size | Number | Maximum Queue Size |
| Name | String | Component Name |
| Network Id | Number | |
| No Events | Boolean | |
| PCAP Broadcast | Boolean | Capture all Traffic |
| PCAP Filename | Number | PCAP Filename |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Programmed Preamble | Number | |
| Raw Data To Inject | String | Data Packet to Inject |
| Raw Dst L2 To Inject | String | Destination L2 Address |
| Raw Dst L3 To Inject | String | Destination L3 Address |
| Raw Dst L4 To Inject | String | Destination L4 Address |
| Request Timeout | Number | |
| Save Dynamic Config | Boolean | |
| Show Commands | Boolean | Show Commands |
| Show Events | Boolean | Show Events |
| Spreading Factor | Number | |
| Start PCAP | Boolean | Start PCAP Capturing |
| Watch | Boolean | Watch Layer |
LoRa Layer Real-Time Parameters
| Parameter | Type | Description |
|---|---|---|
| Address | String | Ethernet/IPv4/IPv6 Address |
| Allow Blocking Event | Boolean | Blocking Events |
| Blocked | Boolean | Disable Component |
| Debug Log Level | Number | Debug Level |
| PCAP Broadcast | Boolean | Capture all Traffic |
| PCAP Filename | String | PCAP Filename |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Watch | Boolean | Watch Layer |
LoRa Layer Functions
| Function | Type | Description |
|---|---|---|
| getLoraAddress(layer) | getter | Get “Address” Parameter |
| getLoraAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
| getLoraBandwidth(layer) | getter | Get “Bandwidth” Parameter |
| getLoraBlocked(layer) | getter | Get “Blocked” Parameter |
| getLoraCodingRate(layer) | getter | Get “Coding Rate” Parameter |
| getLoraDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
| getLoraDestAddress(layer) | getter | Get “Dest Address” Parameter |
| getLoraDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
| getLoraISMBand(layer) | getter | Get “ISM Band” Parameter |
| getLoraNetworkId(layer) | getter | Get “Network Id” Parameter |
| getLoraNoEvents(layer) | getter | Get “No Events” Parameter |
| getLoraPCAPBroadcast(layer) | getter | Get “PCAP Broadcast” Parameter |
| getLoraPCAPFilename(layer) | getter | Get “PCAP Filename” Parameter |
| getLoraPCAPTempFilename(layer) | getter | Get “PCAP TempFilename” Parameter |
| getLoraPassthrough(layer) | getter | Get “Passthrough” Parameter |
| getLoraProgrammedPreamble(layer) | getter | Get “Programmed Preamble” Parameter |
| getLoraSpreadingFactor(layer) | getter | Get “Spreading Factor” Parameter |
| getLoraWatch(layer) | getter | Get “Watch” Parameter |
| getStatsLoraAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
| getStatsLoraDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
| getStatsLoraDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
| getStatsLoraMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
| getStatsLoraMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
| getStatsLoraMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
| getStatsLoraMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
| getStatsLoraMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
| getStatsLoraMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
| getStatsLoraName(layer) | getter | Get “Name” Parameter |
| getStatsLoraRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
| getStatsLoraRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
| getStatsLoraTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
| getStatsLoraTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
| getStatsLoraType(layer) | getter | Get “Type” Parameter |
| getStatsLoraUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
| getStatsLoraUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
| getStatsLoraVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
| getStatsLoraVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
| setLoraAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
| setLoraBlocked(layer,value) | setter | Set “Blocked” Parameter |
| setLoraDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
| setLoraDestAddress(layer,value) | setter | Set “Dest Address” Parameter |
| setLoraNoEvents(layer,value) | setter | Set “No Events” Parameter |
| setLoraPCAPBroadcast(layer,value) | setter | Set “PCAP Broadcast” Parameter |
| setLoraPCAPFilename(layer,value) | setter | Set “PCAP Filename” Parameter |
| setLoraPCAPTempFilename(layer,value) | setter | Set “PCAP TempFilename” Parameter |
| setLoraPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
| setLoraWatch(layer,value) | setter | Set “Watch” Parameter |
lora_lora.txt · Last modified: 2021/07/26 01:52 by vps