This layer provides RTP: A Transport Protocol for Real-Time Applications support. It can be placed on top of UDP, TCP, DTLS or TLS layers.
Parameter | Type | Description |
---|---|---|
Alias | String | |
Debug Log Level | Number | Debug Level |
Dependencies | String | Other dependencies to this element |
Destination Peer | Number | |
Event Filter | String | Filter of Event |
Exact Match | Boolean | |
Max Event Queue Size | Number | Maximum Queue Size |
Name | String | Component Name |
No Events | Boolean | |
Passthrough | Boolean | High-to-Low Layer Passthrough |
Raw Data To Inject | String | Data Packet to Inject |
Raw Dst L2 To Inject | String | Destination L2 Address |
Raw Dst L3 To Inject | String | Destination L3 Address |
Raw Dst L4 To Inject | String | Destination L4 Address |
Request Timeout | Number | |
Rtp Interface | Number | Name of RTP Interface |
Save Dynamic Config | Boolean | |
Show Commands | Boolean | Show Commands |
Show Events | Boolean | Show Events |
Watch | Boolean | Watch Layer |
Parameter | Type | Description |
---|---|---|
Allow Blocking Event | Boolean | Blocking Events |
Blocked | Boolean | Disable Component |
Cname | String | RTCP CNAME |
Debug Log Level | Number | Debug Level |
Name | String | Component Name |
Passthrough | Boolean | High-to-Low Layer Passthrough |
Watch | Boolean | Watch Layer |
Function | Type | Description |
---|---|---|
getRtcpAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
getRtcpBlocked(layer) | getter | Get “Blocked” Parameter |
getRtcpCname(layer) | getter | Get “Cname” Parameter |
getRtcpDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
getRtcpDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
getRtcpName(layer) | getter | Get “Name” Parameter |
getRtcpNoEvents(layer) | getter | Get “No Events” Parameter |
getRtcpPassthrough(layer) | getter | Get “Passthrough” Parameter |
getRtcpWatch(layer) | getter | Get “Watch” Parameter |
getStatsRtcpAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
getStatsRtcpDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
getStatsRtcpDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
getStatsRtcpMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
getStatsRtcpMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
getStatsRtcpMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
getStatsRtcpMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
getStatsRtcpMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
getStatsRtcpMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
getStatsRtcpName(layer) | getter | Get “Name” Parameter |
getStatsRtcpRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
getStatsRtcpRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
getStatsRtcpTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
getStatsRtcpTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
getStatsRtcpType(layer) | getter | Get “Type” Parameter |
getStatsRtcpUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
getStatsRtcpUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
getStatsRtcpVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
getStatsRtcpVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
setRtcpAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
setRtcpBlocked(layer,value) | setter | Set “Blocked” Parameter |
setRtcpCname(layer,value) | setter | Set “Cname” Parameter |
setRtcpDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
setRtcpName(layer,value) | setter | Set “Name” Parameter |
setRtcpNoEvents(layer,value) | setter | Set “No Events” Parameter |
setRtcpPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
setRtcpWatch(layer,value) | setter | Set “Watch” Parameter |