The audio layer is used to both play and record auto. It must be placed on top of TCP, TLS, RTP, SRTP, Camera, Recorder, QoS or UDP layers.
Parameter | Type | Description |
---|---|---|
Alias | String | |
Debug Log Level | Number | Debug Level |
Dependencies | String | Other dependencies to this element |
Destination Peer | Number | |
Event Filter | String | Filter of Event |
Exact Match | Boolean | |
Max Event Queue Size | Number | Maximum Queue Size |
Name | String | Component Name |
No Events | Boolean | |
Passthrough | Boolean | High-to-Low Layer Passthrough |
Play | Boolean | |
Playback Direction | Number | |
Raw Data To Inject | String | Data Packet to Inject |
Raw Dst L2 To Inject | String | Destination L2 Address |
Raw Dst L3 To Inject | String | Destination L3 Address |
Raw Dst L4 To Inject | String | Destination L4 Address |
Record | Boolean | |
Request Timeout | Number | |
Save Dynamic Config | Boolean | |
Show Commands | Boolean | Show Commands |
Show Events | Boolean | Show Events |
Watch | Boolean | Watch Layer |
Parameter | Type | Description |
---|---|---|
Allow Blocking Event | Boolean | Blocking Events |
Blocked | Boolean | Disable Component |
Debug Log Level | Number | Debug Level |
Passthrough | Boolean | High-to-Low Layer Passthrough |
Three Way | Boolean | Three Way Detection |
Watch | Boolean | Watch Layer |
Function | Type | Description |
---|---|---|
getAudioAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
getAudioBlocked(layer) | getter | Get “Blocked” Parameter |
getAudioDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
getAudioDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
getAudioNoEvents(layer) | getter | Get “No Events” Parameter |
getAudioPassthrough(layer) | getter | Get “Passthrough” Parameter |
getAudioPlay(layer) | getter | Get “Play” Parameter |
getAudioPlaybackDirection(layer) | getter | Get “Playback Direction” Parameter |
getAudioRecord(layer) | getter | Get “Record” Parameter |
getAudioThreeWay(layer) | getter | Get “Three Way” Parameter |
getAudioWatch(layer) | getter | Get “Watch” Parameter |
getStatsAudioAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
getStatsAudioDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
getStatsAudioDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
getStatsAudioMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
getStatsAudioMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
getStatsAudioMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
getStatsAudioMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
getStatsAudioMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
getStatsAudioMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
getStatsAudioName(layer) | getter | Get “Name” Parameter |
getStatsAudioRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
getStatsAudioRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
getStatsAudioTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
getStatsAudioTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
getStatsAudioType(layer) | getter | Get “Type” Parameter |
getStatsAudioUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
getStatsAudioUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
getStatsAudioVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
getStatsAudioVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
setAudioAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
setAudioBlocked(layer,value) | setter | Set “Blocked” Parameter |
setAudioDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
setAudioNoEvents(layer,value) | setter | Set “No Events” Parameter |
setAudioPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
setAudioPlay(layer,value) | setter | Set “Play” Parameter |
setAudioPlaybackDirection(layer,value) | setter | Set “Playback Direction” Parameter |
setAudioRecord(layer,value) | setter | Set “Record” Parameter |
setAudioWatch(layer,value) | setter | Set “Watch” Parameter |