Sidebar
ble_ble
Table of Contents
BLE Layer (ble)
The BLE layer provides Bluetooth Low Energy support. It requires a physical layer compatible with BLE. It can be placed on top of an ethernet layer to support BLE encapsulation or it can be placed on top of the right physical layer.
BLE Layer Configuration Parameters
| Parameter | Type | Description |
|---|---|---|
| Alias | String | |
| BD Address | String | |
| Connect | Boolean | |
| Debug Log Level | Number | Debug Level |
| Dependencies | String | Other dependencies to this element |
| Dest BD Address | String | |
| Destination Peer | Number | |
| Event Filter | String | Filter of Event |
| Exact Match | Boolean | |
| IETF IoT | Boolean | |
| Max Event Queue Size | Number | Maximum Queue Size |
| Name | String | Component Name |
| No Events | Boolean | |
| PCAP Broadcast | Boolean | Capture all Traffic |
| PCAP Filename | Number | PCAP Filename |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Raw Data To Inject | String | Data Packet to Inject |
| Raw Dst L2 To Inject | String | Destination L2 Address |
| Raw Dst L3 To Inject | String | Destination L3 Address |
| Raw Dst L4 To Inject | String | Destination L4 Address |
| Request Timeout | Number | |
| Role | Number | |
| Save Dynamic Config | Boolean | |
| Show Commands | Boolean | Show Commands |
| Show Events | Boolean | Show Events |
| Start PCAP | Boolean | Start PCAP Capturing |
| Watch | Boolean | Watch Layer |
BLE Layer Real-Time Parameters
| Parameter | Type | Description |
|---|---|---|
| Allow Blocking Event | Boolean | Blocking Events |
| Blocked | Boolean | Disable Component |
| Debug Log Level | Number | Debug Level |
| PCAP Broadcast | Boolean | Capture all Traffic |
| PCAP Filename | String | PCAP Filename |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Watch | Boolean | Watch Layer |
BLE Layer Functions
| Function | Type | Description |
|---|---|---|
| bleConnect(layer,address) | function | Connect to slave |
| bleDisconnect(layer) | function | Tear down connection |
| getBleAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
| getBleBlocked(layer) | getter | Get “Blocked” Parameter |
| getBleDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
| getBleDestBDAddress(layer) | getter | Get “Dest BD Address” Parameter |
| getBleDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
| getBleIETFIoT(layer) | getter | Get “IETF IoT” Parameter |
| getBleNoEvents(layer) | getter | Get “No Events” Parameter |
| getBlePCAPBroadcast(layer) | getter | Get “PCAP Broadcast” Parameter |
| getBlePCAPFilename(layer) | getter | Get “PCAP Filename” Parameter |
| getBlePCAPTempFilename(layer) | getter | Get “PCAP TempFilename” Parameter |
| getBlePassthrough(layer) | getter | Get “Passthrough” Parameter |
| getBleWatch(layer) | getter | Get “Watch” Parameter |
| getStatsBleAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
| getStatsBleDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
| getStatsBleDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
| getStatsBleMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
| getStatsBleMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
| getStatsBleMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
| getStatsBleMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
| getStatsBleMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
| getStatsBleMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
| getStatsBleName(layer) | getter | Get “Name” Parameter |
| getStatsBleRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
| getStatsBleRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
| getStatsBleTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
| getStatsBleTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
| getStatsBleType(layer) | getter | Get “Type” Parameter |
| getStatsBleUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
| getStatsBleUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
| getStatsBleVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
| getStatsBleVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
| isEventBleData(event) | event | Data Event |
| isEventBleGapConnected(event) | event | Gap Connected Event |
| isEventBleGapDisconnected(event) | event | Gap Disconnected Event |
| isEventBleL2CapReleased(event) | event | L2Cap Release Event |
| isEventBleL2CapSetup(event) | event | L2Cap Setup Event |
| setBleAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
| setBleBlocked(layer,value) | setter | Set “Blocked” Parameter |
| setBleDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
| setBleDestBDAddress(layer,value) | setter | Set “Dest BD Address” Parameter |
| setBleNoEvents(layer,value) | setter | Set “No Events” Parameter |
| setBlePCAPBroadcast(layer,value) | setter | Set “PCAP Broadcast” Parameter |
| setBlePCAPFilename(layer,value) | setter | Set “PCAP Filename” Parameter |
| setBlePCAPTempFilename(layer,value) | setter | Set “PCAP TempFilename” Parameter |
| setBlePassthrough(layer,value) | setter | Set “Passthrough” Parameter |
| setBleWatch(layer,value) | setter | Set “Watch” Parameter |
ble_ble.txt · Last modified: 2021/07/26 00:52 by vps