Sidebar
configuration_config
Table of Contents
Configuration Layer (config)
It creates a configuration layer that enables a remote endpoint to control the VPS+ agent using regular traffic interface. It is used for debugging and monitoring. This layer can be placed on top of UDP, TCP or TLS.
Configuration Layer Configuration Parameters
| Parameter | Type | Description |
|---|---|---|
| Alias | String | |
| Debug Log Level | Number | Debug Level |
| Dependencies | String | Other dependencies to this element |
| Destination Peer | Number | |
| Event Filter | String | Filter of Event |
| Exact Match | Boolean | |
| Max Event Queue Size | Number | Maximum Queue Size |
| Name | String | Component Name |
| No Events | Boolean | |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Raw Data To Inject | String | Data Packet to Inject |
| Raw Dst L2 To Inject | String | Destination L2 Address |
| Raw Dst L3 To Inject | String | Destination L3 Address |
| Raw Dst L4 To Inject | String | Destination L4 Address |
| Request Timeout | Number | |
| Save Dynamic Config | Boolean | |
| Show Commands | Boolean | Show Commands |
| Show Events | Boolean | Show Events |
| Watch | Boolean | Watch Layer |
Configuration Layer Real-Time Parameters
| Parameter | Type | Description |
|---|---|---|
| Allow Blocking Event | Boolean | Blocking Events |
| Blocked | Boolean | Disable Component |
| Debug Log Level | Number | Debug Level |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Watch | Boolean | Watch Layer |
Configuration Layer Functions
| Function | Type | Description |
|---|---|---|
| getConfigAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
| getConfigBlocked(layer) | getter | Get “Blocked” Parameter |
| getConfigDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
| getConfigDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
| getConfigNoEvents(layer) | getter | Get “No Events” Parameter |
| getConfigPassthrough(layer) | getter | Get “Passthrough” Parameter |
| getConfigWatch(layer) | getter | Get “Watch” Parameter |
| getStatsConfigAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
| getStatsConfigDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
| getStatsConfigDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
| getStatsConfigMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
| getStatsConfigMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
| getStatsConfigMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
| getStatsConfigMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
| getStatsConfigMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
| getStatsConfigMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
| getStatsConfigName(layer) | getter | Get “Name” Parameter |
| getStatsConfigRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
| getStatsConfigRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
| getStatsConfigTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
| getStatsConfigTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
| getStatsConfigType(layer) | getter | Get “Type” Parameter |
| getStatsConfigUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
| getStatsConfigUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
| getStatsConfigVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
| getStatsConfigVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
| setConfigAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
| setConfigBlocked(layer,value) | setter | Set “Blocked” Parameter |
| setConfigDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
| setConfigNoEvents(layer,value) | setter | Set “No Events” Parameter |
| setConfigPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
| setConfigWatch(layer,value) | setter | Set “Watch” Parameter |
configuration_config.txt · Last modified: 2021/07/26 01:00 by vps