The bind layer is used to forward down downstream packets from a separate layer. The bind layer can be placed on top on any layer.
Parameter | Type | Description |
---|---|---|
Alias | String | |
Bindee | Number | Name of Bindee |
Debug Log Level | Number | Debug Level |
Dependencies | String | Other dependencies to this element |
Destination Peer | Number | |
Event Filter | String | Filter of Event |
Exact Match | Boolean | |
Max Event Queue Size | Number | Maximum Queue Size |
Name | String | Component Name |
No Events | Boolean | |
Passthrough | Boolean | High-to-Low Layer Passthrough |
Raw Data To Inject | String | Data Packet to Inject |
Raw Dst L2 To Inject | String | Destination L2 Address |
Raw Dst L3 To Inject | String | Destination L3 Address |
Raw Dst L4 To Inject | String | Destination L4 Address |
Request Timeout | Number | |
Save Dynamic Config | Boolean | |
Show Commands | Boolean | Show Commands |
Show Events | Boolean | Show Events |
Watch | Boolean | Watch Layer |
Parameter | Type | Description |
---|---|---|
Allow Blocking Event | Boolean | Blocking Events |
Blocked | Boolean | Disable Component |
Debug Log Level | Number | Debug Level |
Passthrough | Boolean | High-to-Low Layer Passthrough |
Watch | Boolean | Watch Layer |
Function | Type | Description |
---|---|---|
getBindAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
getBindBlocked(layer) | getter | Get “Blocked” Parameter |
getBindDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
getBindDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
getBindNoEvents(layer) | getter | Get “No Events” Parameter |
getBindPassthrough(layer) | getter | Get “Passthrough” Parameter |
getBindWatch(layer) | getter | Get “Watch” Parameter |
getStatsBindAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
getStatsBindDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
getStatsBindDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
getStatsBindMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
getStatsBindMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
getStatsBindMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
getStatsBindMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
getStatsBindMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
getStatsBindMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
getStatsBindName(layer) | getter | Get “Name” Parameter |
getStatsBindRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
getStatsBindRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
getStatsBindTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
getStatsBindTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
getStatsBindType(layer) | getter | Get “Type” Parameter |
getStatsBindUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
getStatsBindUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
getStatsBindVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
getStatsBindVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
setBindAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
setBindBlocked(layer,value) | setter | Set “Blocked” Parameter |
setBindDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
setBindNoEvents(layer,value) | setter | Set “No Events” Parameter |
setBindPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
setBindWatch(layer,value) | setter | Set “Watch” Parameter |