Sidebar
echo_echo
Table of Contents
Echo Layer (echo)
The echo layer transmits downstream and upstream packet. This layer can be placed on top of any other layer.
Echo Layer Configuration Parameters
| Parameter | Type | Description |
|---|---|---|
| Alias | String | |
| Broadcast | Boolean | Broadcast Echo |
| Debug Log Level | Number | Debug Level |
| Dependencies | String | Other dependencies to this element |
| Destination Peer | Number | |
| Event Filter | String | Filter of Event |
| Exact Match | Boolean | |
| Max Event Queue Size | Number | Maximum Queue Size |
| Name | String | Component Name |
| No Events | Boolean | |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Raw Data To Inject | String | Data Packet to Inject |
| Raw Dst L2 To Inject | String | Destination L2 Address |
| Raw Dst L3 To Inject | String | Destination L3 Address |
| Raw Dst L4 To Inject | String | Destination L4 Address |
| Request Timeout | Number | |
| Save Dynamic Config | Boolean | |
| Show Commands | Boolean | Show Commands |
| Show Events | Boolean | Show Events |
| Three Way | Boolean | Three Way Detection |
| Watch | Boolean | Watch Layer |
Echo Layer Real-Time Parameters
| Parameter | Type | Description |
|---|---|---|
| Allow Blocking Event | Boolean | Blocking Events |
| Blocked | Boolean | Disable Component |
| Broadcast | Boolean | Broadcast Echo |
| Debug Log Level | Number | Debug Level |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Three Way | Boolean | Three Way Detection |
| Watch | Boolean | Watch Layer |
Echo Layer Functions
| Function | Type | Description |
|---|---|---|
| getEchoAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
| getEchoBlocked(layer) | getter | Get “Blocked” Parameter |
| getEchoBroadcast(layer) | getter | Get “Broadcast” Parameter |
| getEchoDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
| getEchoDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
| getEchoNoEvents(layer) | getter | Get “No Events” Parameter |
| getEchoPassthrough(layer) | getter | Get “Passthrough” Parameter |
| getEchoThreeWay(layer) | getter | Get “Three Way” Parameter |
| getEchoWatch(layer) | getter | Get “Watch” Parameter |
| getStatsEchoAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
| getStatsEchoDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
| getStatsEchoDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
| getStatsEchoMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
| getStatsEchoMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
| getStatsEchoMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
| getStatsEchoMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
| getStatsEchoMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
| getStatsEchoMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
| getStatsEchoName(layer) | getter | Get “Name” Parameter |
| getStatsEchoRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
| getStatsEchoRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
| getStatsEchoTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
| getStatsEchoTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
| getStatsEchoType(layer) | getter | Get “Type” Parameter |
| getStatsEchoUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
| getStatsEchoUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
| getStatsEchoVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
| getStatsEchoVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
| setEchoAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
| setEchoBlocked(layer,value) | setter | Set “Blocked” Parameter |
| setEchoDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
| setEchoNoEvents(layer,value) | setter | Set “No Events” Parameter |
| setEchoPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
| setEchoWatch(layer,value) | setter | Set “Watch” Parameter |
echo_echo.txt · Last modified: 2021/07/26 01:22 by vps