Sidebar
gpio_gpio
Table of Contents
GPIO Layer (gpio)
The GPIO layer provides General Purpose Input/Output functionality. This layer can be placed on top of any layer.
GPIO Layer Configuration Parameters
| Parameter | Type | Description |
|---|---|---|
| Alias | String | |
| Debug Log Level | Number | Debug Level |
| Dependencies | String | Other dependencies to this element |
| Destination Peer | Number | |
| Event Filter | String | Filter of Event |
| Exact Match | Boolean | |
| Input Port List | Number | |
| Max Event Queue Size | Number | Maximum Queue Size |
| Name | String | Component Name |
| No Events | Boolean | |
| Output Port List | Number | |
| PWM Period | Number | |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Raw Data To Inject | String | Data Packet to Inject |
| Raw Dst L2 To Inject | String | Destination L2 Address |
| Raw Dst L3 To Inject | String | Destination L3 Address |
| Raw Dst L4 To Inject | String | Destination L4 Address |
| Request Timeout | Number | |
| Save Dynamic Config | Boolean | |
| Show Commands | Boolean | Show Commands |
| Show Events | Boolean | Show Events |
| Watch | Boolean | Watch Layer |
GPIO Layer Real-Time Parameters
| Parameter | Type | Description |
|---|---|---|
| Allow Blocking Event | Boolean | Blocking Events |
| Blocked | Boolean | Disable Component |
| Debug Log Level | Number | Debug Level |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Watch | Boolean | Watch Layer |
GPIO Layer Functions
| Function | Type | Description |
|---|---|---|
| getGpioAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
| getGpioBlocked(layer) | getter | Get “Blocked” Parameter |
| getGpioDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
| getGpioDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
| getGpioNoEvents(layer) | getter | Get “No Events” Parameter |
| getGpioPWMPeriod(layer) | getter | Get “PWM Period” Parameter |
| getGpioPassthrough(layer) | getter | Get “Passthrough” Parameter |
| getGpioWatch(layer) | getter | Get “Watch” Parameter |
| getStatsGpioAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
| getStatsGpioDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
| getStatsGpioDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
| getStatsGpioMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
| getStatsGpioMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
| getStatsGpioMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
| getStatsGpioMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
| getStatsGpioMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
| getStatsGpioMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
| getStatsGpioName(layer) | getter | Get “Name” Parameter |
| getStatsGpioRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
| getStatsGpioRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
| getStatsGpioTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
| getStatsGpioTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
| getStatsGpioType(layer) | getter | Get “Type” Parameter |
| getStatsGpioUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
| getStatsGpioUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
| getStatsGpioVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
| getStatsGpioVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
| gpioDisable(layer,port) | function | Disable I/O Port |
| gpioEnable(layer,port) | function | Enable I/O Port |
| gpioInputDirection(layer,port,direction) | function | Configure I/O Port as Input |
| gpioOutputDirection(layer,port,direction) | function | Configure I/O Port as Output |
| gpioPwmStart(layer,port) | function | Start PWM |
| gpioPwmStop(layer,port) | function | Stop PWM |
| gpioWriteHigh(layer,port) | function | Write I/O Port High Level |
| gpioWriteLow(layer,port) | function | Write I/O Port Low Level |
| setGpioAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
| setGpioBlocked(layer,value) | setter | Set “Blocked” Parameter |
| setGpioDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
| setGpioNoEvents(layer,value) | setter | Set “No Events” Parameter |
| setGpioPWMPeriod(layer,value) | setter | Set “PWM Period” Parameter |
| setGpioPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
| setGpioWatch(layer,value) | setter | Set “Watch” Parameter |
gpio_gpio.txt · Last modified: 2021/07/26 01:37 by vps