Sidebar
raw_raw
Table of Contents
Raw Layer (raw)
The raw layer is used to transmit and receive raw packets. It can be deployed on top of any layer.
Raw Layer Configuration Parameters
| Parameter | Type | Description |
|---|---|---|
| Alias | String | |
| Debug Log Level | Number | Debug Level |
| Dependencies | String | Other dependencies to this element |
| Destination Peer | Number | |
| Event Filter | String | Filter of Event |
| Exact Match | Boolean | |
| Max Event Queue Size | Number | Maximum Queue Size |
| Name | String | Component Name |
| No Events | Boolean | |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Raw Data To Inject | String | Data Packet to Inject |
| Raw Dst L2 To Inject | String | Destination L2 Address |
| Raw Dst L3 To Inject | String | Destination L3 Address |
| Raw Dst L4 To Inject | String | Destination L4 Address |
| Request Timeout | Number | |
| Save Dynamic Config | Boolean | |
| Show Commands | Boolean | Show Commands |
| Show Events | Boolean | Show Events |
| Watch | Boolean | Watch Layer |
Raw Layer Real-Time Parameters
| Parameter | Type | Description |
|---|---|---|
| Allow Blocking Event | Boolean | Blocking Events |
| Blocked | Boolean | Disable Component |
| Debug Log Level | Number | Debug Level |
| Passthrough | Boolean | High-to-Low Layer Passthrough |
| Watch | Boolean | Watch Layer |
Raw Layer Functions
| Function | Type | Description |
|---|---|---|
| getRawAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
| getRawBlocked(layer) | getter | Get “Blocked” Parameter |
| getRawDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
| getRawDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
| getRawNoEvents(layer) | getter | Get “No Events” Parameter |
| getRawPassthrough(layer) | getter | Get “Passthrough” Parameter |
| getRawWatch(layer) | getter | Get “Watch” Parameter |
| getStatsRawAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
| getStatsRawDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
| getStatsRawDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
| getStatsRawMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
| getStatsRawMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
| getStatsRawMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
| getStatsRawMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
| getStatsRawMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
| getStatsRawMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
| getStatsRawName(layer) | getter | Get “Name” Parameter |
| getStatsRawRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
| getStatsRawRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
| getStatsRawTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
| getStatsRawTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
| getStatsRawType(layer) | getter | Get “Type” Parameter |
| getStatsRawUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
| getStatsRawUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
| getStatsRawVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
| getStatsRawVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
| isEventRawData(event) | event | Data Available Event |
| setRawAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
| setRawBlocked(layer,value) | setter | Set “Blocked” Parameter |
| setRawDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
| setRawNoEvents(layer,value) | setter | Set “No Events” Parameter |
| setRawPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
| setRawWatch(layer,value) | setter | Set “Watch” Parameter |
raw_raw.txt · Last modified: 2021/07/26 02:40 by vps