Netualizer

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== BMP280 Layer (bmp280) ======

This is a helper layer that enables access to the //[[https://www.bosch-sensortec.com/products/environmental-sensors/pressure-sensors/bmp280/|BMP280]]// temperature and pressure sensor. It must be deployed on top of an HTTP, MQTT, UDP, IP, AWS, Azure or CoAP layer.

===== BMP280 Layer Configuration Parameters =====

^                          Parameter^      Type^                                                           Description^
|                            Address|    Number|                                            Ethernet/IPv4/IPv6 Address|
|                              Alias|    String|                                                                      |
|                        BitsPerWord|    Number|                                                                      |
|                    Debug Log Level|    Number|                                                           Debug Level|
|                       Dependencies|    String|                                    Other dependencies to this element|
|                   Destination Peer|    Number|                                                                      |
|                             Device|    String|                                                                      |
|                       Event Filter|    String|                                                       Filter of Event|
|                        Exact Match|   Boolean|                                                                      |
|               Max Event Queue Size|    Number|                                                    Maximum Queue Size|
|                               Mode|    Number|                                                                      |
|                               Name|    String|                                                        Component Name|
|                          No Events|   Boolean|                                                                      |
|                        Passthrough|   Boolean|                                         High-to-Low Layer Passthrough|
|                             Period|    String|                                                                      |
|                           Pressure|   Boolean|                                                                      |
|                 Raw Data To Inject|    String|                                                 Data Packet to Inject|
|               Raw Dst L2 To Inject|    String|                                                Destination L2 Address|
|               Raw Dst L3 To Inject|    String|                                                Destination L3 Address|
|               Raw Dst L4 To Inject|    String|                                                Destination L4 Address|
|                    Request Timeout|    Number|                                                                      |
|                Save Dynamic Config|   Boolean|                                                                      |
|                              Sense|   Boolean|                                                                      |
|                      Show Commands|   Boolean|                                                         Show Commands|
|                        Show Events|   Boolean|                                                           Show Events|
|                              Speed|    Number|                                                                      |
|                        Temperature|   Boolean|                                                                      |
|                              Topic|    String|                                                                      |
|                              Watch|   Boolean|                                                           Watch Layer|

===== BMP280 Layer Real-Time Parameters =====

^                          Parameter^      Type^                                                           Description^
|               Allow Blocking Event|   Boolean|                                                       Blocking Events|
|                            Blocked|   Boolean|                                                     Disable Component|
|                    Debug Log Level|    Number|                                                           Debug Level|
|                        Passthrough|   Boolean|                                         High-to-Low Layer Passthrough|
|                              Watch|   Boolean|                                                           Watch Layer|

===== BMP280 Layer Functions =====

^                                                    Function^      Type^                                                           Description^
|                     getStatsBmp280AvailableInstances(layer)|    getter|                                   Get "Available Instances" Parameter|
|                   getStatsBmp280DownstreamLastPacket(layer)|    getter|                                Get "Downstream Last Packet" Parameter|
|                  getStatsBmp280DownstreamPacketCount(layer)|    getter|                               Get "Downstream Packet Count" Parameter|
|                     getStatsBmp280MaxDownstreamDelay(layer)|    getter|                                  Get "Max Downstream Delay" Parameter|
|                       getStatsBmp280MaxUpstreamDelay(layer)|    getter|                                    Get "Max Upstream Delay" Parameter|
|                    getStatsBmp280MeanDownstreamDelay(layer)|    getter|                                 Get "Mean Downstream Delay" Parameter|
|                      getStatsBmp280MeanUpstreamDelay(layer)|    getter|                                   Get "Mean Upstream Delay" Parameter|
|                     getStatsBmp280MinDownstreamDelay(layer)|    getter|                                  Get "Min Downstream Delay" Parameter|
|                       getStatsBmp280MinUpstreamDelay(layer)|    getter|                                    Get "Min Upstream Delay" Parameter|
|                                   getStatsBmp280Name(layer)|    getter|                                                  Get "Name" Parameter|
|                      getStatsBmp280RateBpsDownstream(layer)|    getter|                                   Get "Rate Bps Downstream" Parameter|
|                        getStatsBmp280RateBpsUpstream(layer)|    getter|                                     Get "Rate Bps Upstream" Parameter|
|                            getStatsBmp280TimestampIn(layer)|    getter|                                          Get "Timestamp In" Parameter|
|                           getStatsBmp280TimestampOut(layer)|    getter|                                         Get "Timestamp Out" Parameter|
|                                   getStatsBmp280Type(layer)|    getter|                                                  Get "Type" Parameter|
|                     getStatsBmp280UpstreamLastPacket(layer)|    getter|                                  Get "Upstream Last Packet" Parameter|
|                    getStatsBmp280UpstreamPacketCount(layer)|    getter|                                 Get "Upstream Packet Count" Parameter|
|                getStatsBmp280VarianceDownstreamDelay(layer)|    getter|                             Get "Variance Downstream Delay" Parameter|
|                  getStatsBmp280VarianceUpstreamDelay(layer)|    getter|                               Get "Variance Upstream Delay" Parameter|
|                          getbmp280AllowBlockingEvent(layer)|    getter|                                  Get "Allow Blocking Event" Parameter|
|                                     getbmp280Blocked(layer)|    getter|                                               Get "Blocked" Parameter|
|                               getbmp280DebugLogLevel(layer)|    getter|                                       Get "Debug Log Level" Parameter|
|                             getbmp280DestinationPeer(layer)|    getter|                                      Get "Destination Peer" Parameter|
|                                    getbmp280NoEvents(layer)|    getter|                                             Get "No Events" Parameter|
|                                 getbmp280Passthrough(layer)|    getter|                                           Get "Passthrough" Parameter|
|                                      getbmp280Period(layer)|    getter|                                                Get "Period" Parameter|
|                                    getbmp280Pressure(layer)|    getter|                                              Get "Pressure" Parameter|
|                                 getbmp280Temperature(layer)|    getter|                                           Get "Temperature" Parameter|
|                                       getbmp280Watch(layer)|    getter|                                                 Get "Watch" Parameter|
|                    setbmp280AllowBlockingEvent(layer,value)|    setter|                                  Set "Allow Blocking Event" Parameter|
|                               setbmp280Blocked(layer,value)|    setter|                                               Set "Blocked" Parameter|
|                         setbmp280DebugLogLevel(layer,value)|    setter|                                       Set "Debug Log Level" Parameter|
|                              setbmp280NoEvents(layer,value)|    setter|                                             Set "No Events" Parameter|
|                           setbmp280Passthrough(layer,value)|    setter|                                           Set "Passthrough" Parameter|
|                                setbmp280Period(layer,value)|    setter|                                                Set "Period" Parameter|
|                              setbmp280Pressure(layer,value)|    setter|                                              Set "Pressure" Parameter|
|                           setbmp280Temperature(layer,value)|    setter|                                           Set "Temperature" Parameter|
|                                 setbmp280Watch(layer,value)|    setter|                                                 Set "Watch" Parameter|
Netualizer

User Tools

Site Tools

Page Tools
