Netualizer
https://l7tr.com/wiki/
2026-04-20T10:43:07+00:00Netualizer
https://l7tr.com/wiki/
https://l7tr.com/wiki/lib/tpl/dokuwiki/images/favicon.icotext/html2021-07-25T04:13:47+00:00Anonymous (anonymous@undisclosed.example.com)6lobtle_6lobtle
https://l7tr.com/wiki/doku.php?id=6lobtle_6lobtle&rev=1627186427&do=diff
6LoBTLE Layer (6lobtle)
The 6LoBTLE layer is compliant with RFC7668: IPv6 over BLUETOOTH(R) Low Energy. It must be deployed on top of a BLE or LoRa layer (for IPv6 support on LoRa).
6LoBTLE Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-25T04:19:07+00:00Anonymous (anonymous@undisclosed.example.com)6lowpan_6lowpan
https://l7tr.com/wiki/doku.php?id=6lowpan_6lowpan&rev=1627186747&do=diff
6LoWPAN Layer (6lowpan)
The 6LoWPAN layer is compliant with RFC4944: Transmission of IPv6 Packets over IEEE 802.15.4 Networks. It must be deployed on top of a IEEE 802.15.4 layer.
6LoWPAN Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-25T04:24:06+00:00Anonymous (anonymous@undisclosed.example.com)actuator_iotactuator
https://l7tr.com/wiki/doku.php?id=actuator_iotactuator&rev=1627187046&do=diff
Actuator Layer (iotActuator)
The Actuator layer provides an emulated IoT actuator. It must be deployed on top of an HTTP, MQTT, UDP, IP, AWS, Azure or CoAP layer.
Actuator Layer Configuration Parameters
Parameter Typetext/html2022-01-29T04:09:57+00:00Anonymous (anonymous@undisclosed.example.com)architecture
https://l7tr.com/wiki/doku.php?id=architecture&rev=1643429397&do=diff
Architecture
Netualizer is a fully distributed architecture that relies on agents that interact with controllers:
Agents provide services that can run on physical hardware (i.e. embedded devices and general purpose computers) or on virtualized setups and containers.
The agents are provisioned and configured by the controllers to dynamically support any possible communication stack. This includes physical, link, network, transport and application layers and application.
The controllers can dr…text/html2021-07-26T01:17:33+00:00Anonymous (anonymous@undisclosed.example.com)audio_audio
https://l7tr.com/wiki/doku.php?id=audio_audio&rev=1627262253&do=diff
Audio Layer (audio)
The audio layer is used to both play and record auto. It must be placed on top of TCP, TLS, RTP, SRTP, Camera, Recorder, QoS or UDP layers.
Audio Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T01:17:46+00:00Anonymous (anonymous@undisclosed.example.com)automatic_speech_recognition_asr
https://l7tr.com/wiki/doku.php?id=automatic_speech_recognition_asr&rev=1627262266&do=diff
Automatic Speech Recognition Layer (asr)
The ASR layer provides speech recognition. It can be placed on top of RTP, SRTP, Recorder, QoS, Player, TTS, detector or generator layers.
Automatic Speech Recognition Layer Configuration Parameters
Parametertext/html2021-07-26T03:43:14+00:00Anonymous (anonymous@undisclosed.example.com)aws_aws
https://l7tr.com/wiki/doku.php?id=aws_aws&rev=1627270994&do=diff
AWS Layer (aws)
The AWS helper layer supports AWS IoT functionality. It must be placed on top of an MQTT layer.
AWS Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T03:45:25+00:00Anonymous (anonymous@undisclosed.example.com)azure_azure
https://l7tr.com/wiki/doku.php?id=azure_azure&rev=1627271125&do=diff
Azure Layer (azure)
The Azure helper layer supports Azure IoT Hub functionality. It must be placed on top of an MQTT layer.
Azure Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T00:49:47+00:00Anonymous (anonymous@undisclosed.example.com)bind_bind
https://l7tr.com/wiki/doku.php?id=bind_bind&rev=1627260587&do=diff
Bind Layer (bind)
The bind layer is used to forward down downstream packets from a separate layer. The bind layer can be placed on top on any layer.
Bind Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-23T03:20:12+00:00Anonymous (anonymous@undisclosed.example.com)ble
https://l7tr.com/wiki/doku.php?id=ble&rev=1627010412&do=diff
BLE Layer
BLE Layer Configuration Parameters
Parameter Type Description Name String Component Nametext/html2021-07-26T00:52:00+00:00Anonymous (anonymous@undisclosed.example.com)ble_ble
https://l7tr.com/wiki/doku.php?id=ble_ble&rev=1627260720&do=diff
BLE Layer (ble)
The BLE layer provides Bluetooth Low Energy support. It requires a physical layer compatible with BLE. It can be placed on top of an ethernet layer to support BLE encapsulation or it can be placed on top of the right physical layer.text/html2021-07-26T04:30:03+00:00Anonymous (anonymous@undisclosed.example.com)bmp280_bmp280
https://l7tr.com/wiki/doku.php?id=bmp280_bmp280&rev=1627273803&do=diff
BMP280 Layer (bmp280)
This is a helper layer that enables access to the BMP280 temperature and pressure sensor. It must be deployed on top of an HTTP, MQTT, UDP, IP, AWS, Azure or CoAP layer.
BMP280 Layer Configuration Parameters
Parametertext/html2022-01-29T04:12:24+00:00Anonymous (anonymous@undisclosed.example.com)built-in_protocols_and_plugins
https://l7tr.com/wiki/doku.php?id=built-in_protocols_and_plugins&rev=1643429544&do=diff
Built-in Protocols
Netualizer Supports most common IoT and RTC Protocols:
Physical/Link Layers
* IEEE 802.15.4
* BLE
* NB-IoT
* LTE-M
* LoRa
* IEEE 802.11x
* Ethernet
Network/Adaptation Layers
* IPv4
* IPv6
* 6LoWPAN
* 6LoBTLEtext/html2021-07-26T00:53:47+00:00Anonymous (anonymous@undisclosed.example.com)channel_capacity_capacity
https://l7tr.com/wiki/doku.php?id=channel_capacity_capacity&rev=1627260827&do=diff
Channel Capacity Layer (capacity)
The channel capacity layer can be used to limit throughput. This layer can be placed on top of any other layer.
Channel Capacity Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T01:18:10+00:00Anonymous (anonymous@undisclosed.example.com)coap_coap
https://l7tr.com/wiki/doku.php?id=coap_coap&rev=1627262290&do=diff
CoAP Layer (coap)
The CoAP layer supports RFC7252: The Constrained Application Protocol (CoAP). A CoAP layer can be placed on top of UDP, TCP, DTLS or TLS layers.
CoAP Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T01:00:33+00:00Anonymous (anonymous@undisclosed.example.com)configuration_config
https://l7tr.com/wiki/doku.php?id=configuration_config&rev=1627261233&do=diff
Configuration Layer (config)
It creates a configuration layer that enables a remote endpoint to control the VPS+ agent using regular traffic interface. It is used for debugging and monitoring. This layer can be placed on top of UDP, TCP or TLS.
Configuration Layer Configuration Parameterstext/html2021-07-26T01:05:01+00:00Anonymous (anonymous@undisclosed.example.com)detector_detector
https://l7tr.com/wiki/doku.php?id=detector_detector&rev=1627261501&do=diff
Detector Layer (detector)
It provides basic audio signal detection. This layer can be placed on top of an RTP, SRTP, TTS, ASR, Recorder, QoS, Player and Generator layer.
Detector Layer Configuration Parameters
Parameter Typetext/html2021-07-26T01:03:15+00:00Anonymous (anonymous@undisclosed.example.com)dhcp_dhcp
https://l7tr.com/wiki/doku.php?id=dhcp_dhcp&rev=1627261395&do=diff
DHCP Layer (dhcp)
The DHCP layer provides DHCP server functionality. DHCP is specified in RFC2131: Dynamic Host Configuration Protocol. It can be placed on top of a UDP layer.
DHCP Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T01:17:06+00:00Anonymous (anonymous@undisclosed.example.com)dns_dns
https://l7tr.com/wiki/doku.php?id=dns_dns&rev=1627262226&do=diff
DNS Layer (dns)
This layer supports RFC1035: Domain Names - Implementation and Specification. The DNS layer can be placed on a UDP or TCP layer.
DNS Layer Configuration Parameters
Parameter Type Description Aliastext/html2021-07-26T01:21:44+00:00Anonymous (anonymous@undisclosed.example.com)dtls_tls_dtls_tls
https://l7tr.com/wiki/doku.php?id=dtls_tls_dtls_tls&rev=1627262504&do=diff
DTLS/TLS Layer (dtls/tls)
This layer provides RFC5246: The Transport Layer Security (TLS) Protocol Version 1.2 and RFC6347: Datagram Transport Layer Security Version 1.2. This layer can be placed on top of UDP or TCP layers.
DTLS/TLS Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T01:22:37+00:00Anonymous (anonymous@undisclosed.example.com)echo_echo
https://l7tr.com/wiki/doku.php?id=echo_echo&rev=1627262557&do=diff
Echo Layer (echo)
The echo layer transmits downstream and upstream packet. This layer can be placed on top of any other layer.
Echo Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-23T03:21:01+00:00Anonymous (anonymous@undisclosed.example.com)ethernet
https://l7tr.com/wiki/doku.php?id=ethernet&rev=1627010461&do=diff
Ethernet Layer
Ethernet Layer Configuration Parameters
Parameter Type Description Name String Component Nametext/html2021-07-26T01:26:47+00:00Anonymous (anonymous@undisclosed.example.com)ethernet_ethernet
https://l7tr.com/wiki/doku.php?id=ethernet_ethernet&rev=1627262807&do=diff
Ethernet Layer (ethernet)
This layer provides Ethernet support. It can be placed on top of a physical layer that supports Ethernet.
Ethernet Layer Configuration Parameters
Parameter Type Descriptiontext/html2022-01-29T04:10:14+00:00Anonymous (anonymous@undisclosed.example.com)features
https://l7tr.com/wiki/doku.php?id=features&rev=1643429414&do=diff
Features
Netualizer as a framework that enables Protocol Stack Virtualization (PSV) supports:
* Most common IETF L1, L2, L3, L4 and Application layer protocol virtualization.
* Cloud integration: AWS, Azure
* Analytics/ML integration: Tensorflow
* IoT sensor and actuation emulation.text/html2021-07-26T01:35:45+00:00Anonymous (anonymous@undisclosed.example.com)file_transfer_ft
https://l7tr.com/wiki/doku.php?id=file_transfer_ft&rev=1627263345&do=diff
File Transfer Layer (ft)
This layer enables generic transmission and reception of files. It can be placed on top of UDP, TCP or TLS layers.
File Transfer Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T01:36:56+00:00Anonymous (anonymous@undisclosed.example.com)generator_generator
https://l7tr.com/wiki/doku.php?id=generator_generator&rev=1627263416&do=diff
Generator Layer (generator)
It provides basic audio signal generation. This layer can be placed on top of an RTP, SRTP, TTS, ASR, Recorder, QoS, Player and Generator layer.
Generator Layer Configuration Parameters
Parametertext/html2021-07-26T01:37:59+00:00Anonymous (anonymous@undisclosed.example.com)gpio_gpio
https://l7tr.com/wiki/doku.php?id=gpio_gpio&rev=1627263479&do=diff
GPIO Layer (gpio)
The GPIO layer provides General Purpose Input/Output functionality. This layer can be placed on top of any layer.
GPIO Layer Configuration Parameters
Parameter Type Descriptiontext/html2022-01-29T04:12:52+00:00Anonymous (anonymous@undisclosed.example.com)how_does_it_work
https://l7tr.com/wiki/doku.php?id=how_does_it_work&rev=1643429572&do=diff
How does it work ?
Netualizer introduces two components:
Configuration
The configuration specifies what a protocol stack looks like. It is typically built on a controller. For example, the following is a stack that represents a web server:
The configuration is deployed on the target device and becomes its communication stack.text/html2021-07-26T01:43:49+00:00Anonymous (anonymous@undisclosed.example.com)http_http
https://l7tr.com/wiki/doku.php?id=http_http&rev=1627263829&do=diff
HTTP Layer (http)
This layer provides RFC7540: Hypertext Transfer Protocol Version 2 (HTTP/2) functionality. It can be placed on top of TCP or TLS layers.
HTTP Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T01:38:59+00:00Anonymous (anonymous@undisclosed.example.com)i2c_i2c
https://l7tr.com/wiki/doku.php?id=i2c_i2c&rev=1627263539&do=diff
I2C Layer
The I2C layer provides Inter-Integrated Circuit functionality. This layer can be placed on top of any layer.
I2C Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-24T02:02:43+00:00Anonymous (anonymous@undisclosed.example.com)i_o_gpio
https://l7tr.com/wiki/doku.php?id=i_o_gpio&rev=1627092163&do=diff
GPIO Layer (gpio)
GPIO Layer Configuration Parameters
Parameter Type Description Alias Stringtext/html2021-07-23T03:11:35+00:00Anonymous (anonymous@undisclosed.example.com)ieee_802.11
https://l7tr.com/wiki/doku.php?id=ieee_802.11&rev=1627009895&do=diff
IEEE 802.11 Layer
IEEE 802.11 Layer Configuration Parameters
Parameter Type Description Name String Component Nametext/html2021-07-26T01:45:48+00:00Anonymous (anonymous@undisclosed.example.com)ieee_802.11_802.11
https://l7tr.com/wiki/doku.php?id=ieee_802.11_802.11&rev=1627263948&do=diff
IEEE 802.11 Layer (802.11)
This layer provides IEEE 802.11 support. It can be placed on top of a physical layer that supports IEEE 802.11.
IEEE 802.11 Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-23T03:11:06+00:00Anonymous (anonymous@undisclosed.example.com)ieee_802.15.4
https://l7tr.com/wiki/doku.php?id=ieee_802.15.4&rev=1627009866&do=diff
IEEE 802.15.4 Layer
IEEE 802.15.4 Layer Configuration Parameters
Parameter Type Description Name String Component Nametext/html2021-07-26T01:46:10+00:00Anonymous (anonymous@undisclosed.example.com)ieee_802.15.4_802.15.4
https://l7tr.com/wiki/doku.php?id=ieee_802.15.4_802.15.4&rev=1627263970&do=diff
IEEE 802.15.4 Layer (802.15.4)
This layer provides IEEE 802.15.4 support. It can be placed on top of a physical layer that supports IEEE 802.15.4.
IEEE 802.15.4 Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T01:50:09+00:00Anonymous (anonymous@undisclosed.example.com)impairment_impair
https://l7tr.com/wiki/doku.php?id=impairment_impair&rev=1627264209&do=diff
Impairment Layer (impair)
The impairment layer can be used to introduce packet loss and latency. It can be placed on top of any layer.
Impairment Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T01:51:24+00:00Anonymous (anonymous@undisclosed.example.com)ip_ip
https://l7tr.com/wiki/doku.php?id=ip_ip&rev=1627264284&do=diff
IP Layer (ip)
The IP layer supports IPv4 and IPv6 support. It can be placed on top of Ethernet, IEEE 802.11, 6LoWPAN, 6LoBTLE, NB-IoT or LTE-M layers.
IP Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T01:52:17+00:00Anonymous (anonymous@undisclosed.example.com)lora_lora
https://l7tr.com/wiki/doku.php?id=lora_lora&rev=1627264337&do=diff
LoRa Layer (lora)
This layer provides LoRa support. It can be placed on top of a physical layer that supports LoRa.
LoRa Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T01:54:42+00:00Anonymous (anonymous@undisclosed.example.com)markov_impairment_markovimpair
https://l7tr.com/wiki/doku.php?id=markov_impairment_markovimpair&rev=1627264482&do=diff
Markov Impairment Layer (markovImpair)
The Markov impairment layer can be used to introduce packet loss and latency in accordance with a 2-state Gilbert-Elliot Channel Model. It can be placed on top of any layer.
Markov Impairment Layer Configuration Parameterstext/html2021-07-26T01:56:10+00:00Anonymous (anonymous@undisclosed.example.com)mdns_mdns
https://l7tr.com/wiki/doku.php?id=mdns_mdns&rev=1627264570&do=diff
mDNS Layer (mdns)
This layer is based on RFC6762: Multicast DNS. It can be placed on top of a UDP layer.
mDNS Layer Configuration Parameters
Parameter Type Description Aliastext/html2021-07-26T02:07:22+00:00Anonymous (anonymous@undisclosed.example.com)media_player_player
https://l7tr.com/wiki/doku.php?id=media_player_player&rev=1627265242&do=diff
Media Player Layer (player)
This layer is used to play a media file. It can be placed on top of an RTP, SRTP, TTS, ASR, audio, generator or detector layer.
Media Player Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T02:07:50+00:00Anonymous (anonymous@undisclosed.example.com)media_recorder_recorder
https://l7tr.com/wiki/doku.php?id=media_recorder_recorder&rev=1627265270&do=diff
Media Recorder Layer (recorder)
This layer is used to record a media file. It can be placed on top of an RTP, SRTP, TTS, ASR, audio, generator or detector layer.
Media Recorder Layer Configuration Parameters
Parameter Typetext/html2022-01-29T04:15:17+00:00Anonymous (anonymous@undisclosed.example.com)more_examples
https://l7tr.com/wiki/doku.php?id=more_examples&rev=1643429717&do=diff
More examples...
Other examples are found as part of the Netualizer controller distribution. They under the examples directory and include:
IoT Examples
* mDNS: Multicast DNS Support
* 6LoWPANSender: 6LoWPAN traffic generator
* WebOfThings: HTTP based IoT example with emulated sensorstext/html2021-07-26T02:09:56+00:00Anonymous (anonymous@undisclosed.example.com)mqtt_mqtt
https://l7tr.com/wiki/doku.php?id=mqtt_mqtt&rev=1627265396&do=diff
MQTT Layer (mqtt)
This layer provides MQTT Version 3.1.1 functionality. It can be placed on top of TCP or TLS layers.
MQTT Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T02:11:28+00:00Anonymous (anonymous@undisclosed.example.com)nb-iot_lte-m_nb-iot_lte-m
https://l7tr.com/wiki/doku.php?id=nb-iot_lte-m_nb-iot_lte-m&rev=1627265488&do=diff
NB-IoT/LTE-M Layer (nb-iot/lte-m)
This layer provides NB-IoT/LTE-M support. It can be placed on top of a physical layer that supports NB-IoT/LTE-M.
NB-IoT/LTE-M Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T02:12:37+00:00Anonymous (anonymous@undisclosed.example.com)pcap_player_pcap
https://l7tr.com/wiki/doku.php?id=pcap_player_pcap&rev=1627265557&do=diff
PCAP Player Layer (pcap)
The PCAP player layer enables the playback of a PCAP file. It can be placed on top of any layer.
PCAP Player Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-23T04:10:35+00:00Anonymous (anonymous@undisclosed.example.com)phy
https://l7tr.com/wiki/doku.php?id=phy&rev=1627013435&do=diff
Physical Layer
Physical Layer Functions
Function Type Description getPhyAllowBlockingEvent getter Get “Allow Blocking Eventtext/html2021-07-26T02:13:35+00:00Anonymous (anonymous@undisclosed.example.com)physical_phy
https://l7tr.com/wiki/doku.php?id=physical_phy&rev=1627265615&do=diff
Physical Layer (phy)
This layer provides a physical layer interface. It depends on the available hardware and can provide Ethernet, IEEE 802.11, IEEE 802.15.4, BLE, LoRa, NB-IoT and LTE-M support.
Physical Layer Configuration Parameters
Parametertext/html2021-07-26T02:15:35+00:00Anonymous (anonymous@undisclosed.example.com)quic_quic
https://l7tr.com/wiki/doku.php?id=quic_quic&rev=1627265735&do=diff
QUIC Layer (quic)
This layer provides both RFC9000: QUIC: A UDP-Based Multiplexed and Secure Transport and Google QUIC transport support. It can be placed on top of UDP layers.
QUIC Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T02:40:11+00:00Anonymous (anonymous@undisclosed.example.com)raw_raw
https://l7tr.com/wiki/doku.php?id=raw_raw&rev=1627267211&do=diff
Raw Layer (raw)
The raw layer is used to transmit and receive raw packets. It can be deployed on top of any layer.
Raw Layer Configuration Parameters
Parameter Type Descriptiontext/html2022-01-29T04:11:47+00:00Anonymous (anonymous@undisclosed.example.com)requirements
https://l7tr.com/wiki/doku.php?id=requirements&rev=1643429507&do=diff
Requirements
Netualizer is multi-platform and multi-architecture.
Agents
OS Service Support:
* Yocto
* Linux
* Windows
* MacOS
* Docker Container (No virtualization)
* FreeRTOS (planned)
* Bare-Metal (planned)
Processor Support:
*text/html2021-07-26T02:40:55+00:00Anonymous (anonymous@undisclosed.example.com)router_router
https://l7tr.com/wiki/doku.php?id=router_router&rev=1627267255&do=diff
Router Layer (router)
The router layer provides packet routing capabilities. It can be placed on top of the IP layer.
Router Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T02:49:23+00:00Anonymous (anonymous@undisclosed.example.com)rtcp_rtcp
https://l7tr.com/wiki/doku.php?id=rtcp_rtcp&rev=1627267763&do=diff
RTCP Layer (rtcp)
This layer provides RTP: A Transport Protocol for Real-Time Applications support. It can be placed on top of UDP, TCP, DTLS or TLS layers.
RTCP Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T02:45:44+00:00Anonymous (anonymous@undisclosed.example.com)rtp_rtp
https://l7tr.com/wiki/doku.php?id=rtp_rtp&rev=1627267544&do=diff
RTP Layer (rtp)
This layer provides RTP: A Transport Protocol for Real-Time Applications support. It can be placed on top of UDP, TCP, DTLS or TLS layers. It supports the following codecs:
* Speech codecs: G.711 MuLaw, G.711 ALaw, G.726, G.723.1, G.729A, GSM6.10, AMR, G.728, G.722, iLBC, Speex, EVRC, GSM-EFR, G.729E, G.729D, LPC, G.722.1/RFC3047, AMR-WB/G.722.2, RTAudio, AAC-LC, SILK, G.718, Opus, iSAC, EVS.text/html2021-07-25T04:24:37+00:00Anonymous (anonymous@undisclosed.example.com)sensor_iotsensor
https://l7tr.com/wiki/doku.php?id=sensor_iotsensor&rev=1627187077&do=diff
Sensor Layer (iotSensor)
The Sensor layer provides an emulated IoT sensor. It must be deployed on top of an HTTP, MQTT, UDP, IP, AWS, Azure or CoAP layer.
Sensor Layer Configuration Parameters
Parameter Type Descriptiontext/html2022-01-29T03:45:21+00:00Anonymous (anonymous@undisclosed.example.com)sidebar
https://l7tr.com/wiki/doku.php?id=sidebar&rev=1643427921&do=diff
Introduction
* What is Netualizer?
* Architecture
* Features
* Requirements
* Built-in Protocols and Plugins
* How does it work?
Examples
* Let's get started: Hello, World!
* LWPAN IoT Use Case: LoRa to AWS
* WPAN IoT Use Case: IEEE 802.15.4, CoAP and Azure
* RTC Use Case: Media Server
* More examples...
Built-in Layers
* 6LoBTLE (6lobtle)
* 6LoWPAN (6lowpan)
* Actuator (iotActuator)
* Audio (audio)
* Automatic Speech Recognition (asr)
* AWS (aws)
* Azure…text/html2021-07-26T03:05:50+00:00Anonymous (anonymous@undisclosed.example.com)sip_sip
https://l7tr.com/wiki/doku.php?id=sip_sip&rev=1627268750&do=diff
SIP Layer (sip)
The SIP layer provides RFC3261: SIP: Session Initiation Protocol support. It can be placed on top of UDP, TCP, TLS and DTLS layers.
SIP Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T03:04:25+00:00Anonymous (anonymous@undisclosed.example.com)snmp_snmp
https://l7tr.com/wiki/doku.php?id=snmp_snmp&rev=1627268665&do=diff
SNMP Layer
The SNMP layer provides rfc3416: Version 2 of the Protocol Operations for the Simple Network Management Protocol (SNMP). The SNMP layer can be placed on top of UDP layers.
SNMP Layer Functions
Function Type Descriptiontext/html2021-07-26T01:40:01+00:00Anonymous (anonymous@undisclosed.example.com)spi_spi
https://l7tr.com/wiki/doku.php?id=spi_spi&rev=1627263601&do=diff
SPI Layer (spi)
The SPI layer provides Serial Parallel Interface functionality. This layer can be placed on top of any layer.
SPI Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T03:06:59+00:00Anonymous (anonymous@undisclosed.example.com)srtp_rtp
https://l7tr.com/wiki/doku.php?id=srtp_rtp&rev=1627268819&do=diff
SRTP Layer (rtp)
This layer provides RFC3711: The Secure Real-time Transport Protocol (SRTP) support. It can be placed on top of UDP layers.
SRTP Layer Configuration Parameters
Parameter Type Description Aliastext/html2022-01-29T03:38:45+00:00Anonymous (anonymous@undisclosed.example.com)start
https://l7tr.com/wiki/doku.php?id=start&rev=1643427525&do=diff
Netualizer
Netualizer is a framework that enables Protocol Stack Virtualization (PSV). Specifically, Netualizer is designed to support fast and massive deployment, provisioning and configuration of scenarios that rely on virtualized networking stacks. It is a multi platform and multi architecture infrastructure that relies on Netualizer agents that provide virtualization and Netualizer controllers that deploy them.text/html2021-07-26T03:08:23+00:00Anonymous (anonymous@undisclosed.example.com)stun_stun
https://l7tr.com/wiki/doku.php?id=stun_stun&rev=1627268903&do=diff
STUN Layer (stun)
This layer provides RFC5389: Session Traversal Utilities for NAT (STUN) support. It can be placed on top of UDP layers.
STUN Layer Configuration Parameters
Parameter Type Description Aliastext/html2021-07-26T03:08:56+00:00Anonymous (anonymous@undisclosed.example.com)tcp_tcp
https://l7tr.com/wiki/doku.php?id=tcp_tcp&rev=1627268936&do=diff
TCP Layer (tcp)
This layer provides Transport Control Protocol support. It can be placed on top of IP layers.
TCP Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T03:09:41+00:00Anonymous (anonymous@undisclosed.example.com)text-to-speech_tts
https://l7tr.com/wiki/doku.php?id=text-to-speech_tts&rev=1627268981&do=diff
Text-to-Speech Layer (tts)
This layer provides Text-to-Speech support. It It can be placed on top of RTP, SRTP, Recorder, QoS, Player, TTS, detector or generator layers.
Text-to-Speech Layer Configuration Parameters
Parametertext/html2021-07-26T03:10:01+00:00Anonymous (anonymous@undisclosed.example.com)timer_timer
https://l7tr.com/wiki/doku.php?id=timer_timer&rev=1627269001&do=diff
Timer Layer (timer)
This layer provides timer support. It can be placed on top of any layer.
Timer Layer Configuration Parameters
Parameter Type Description Aliastext/html2021-07-26T01:40:52+00:00Anonymous (anonymous@undisclosed.example.com)uart_uart
https://l7tr.com/wiki/doku.php?id=uart_uart&rev=1627263652&do=diff
UART Layer (uart)
The UART layer provides Universal Asynchronous Receiver/Transmitter functionality. This layer can be placed on top of any layer.
UART Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T03:10:27+00:00Anonymous (anonymous@undisclosed.example.com)udp_udp
https://l7tr.com/wiki/doku.php?id=udp_udp&rev=1627269027&do=diff
UDP Layer (udp)
This layer provides User Datagram Protocol support. It can be placed on top of IP layers.
UDP Layer Configuration Parameters
Parameter Type Descriptiontext/html2021-07-26T03:12:08+00:00Anonymous (anonymous@undisclosed.example.com)video_camera_camera
https://l7tr.com/wiki/doku.php?id=video_camera_camera&rev=1627269128&do=diff
Video Camera Layer (camera)
This layer is used to support video camera functionality. It can be placed on top of an RTP, SRTP, TTS, ASR, audio, generator or detector layer.
Video Camera Layer Configuration Parameters
Parametertext/html2021-07-23T03:17:35+00:00Anonymous (anonymous@undisclosed.example.com)virtual_phy
https://l7tr.com/wiki/doku.php?id=virtual_phy&rev=1627010255&do=diff
Virtual Physical Layer
Virtual Physical Layer Configuration Parameters
Parameter Type Description Name String Component Nametext/html2021-07-24T01:36:48+00:00Anonymous (anonymous@undisclosed.example.com)virtual_physical_virtualphy
https://l7tr.com/wiki/doku.php?id=virtual_physical_virtualphy&rev=1627090608&do=diff
Virtual Physical Layer (virtualPhy)
Virtual Physical Layer Configuration Parameters
Parameter Type Description Alias String