Netualizer

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Bind Layer (bind) ======

The bind layer is used to forward down downstream packets from a separate layer. The bind layer can be placed on top on any layer.

===== Bind Layer Configuration Parameters =====

^                          Parameter^      Type^                                                           Description^
|                              Alias|    String|                                                                      |
|                             Bindee|    Number|                                                        Name of Bindee|
|                    Debug Log Level|    Number|                                                           Debug Level|
|                       Dependencies|    String|                                    Other dependencies to this element|
|                   Destination Peer|    Number|                                                                      |
|                       Event Filter|    String|                                                       Filter of Event|
|                        Exact Match|   Boolean|                                                                      |
|               Max Event Queue Size|    Number|                                                    Maximum Queue Size|
|                               Name|    String|                                                        Component Name|
|                          No Events|   Boolean|                                                                      |
|                        Passthrough|   Boolean|                                         High-to-Low Layer Passthrough|
|                 Raw Data To Inject|    String|                                                 Data Packet to Inject|
|               Raw Dst L2 To Inject|    String|                                                Destination L2 Address|
|               Raw Dst L3 To Inject|    String|                                                Destination L3 Address|
|               Raw Dst L4 To Inject|    String|                                                Destination L4 Address|
|                    Request Timeout|    Number|                                                                      |
|                Save Dynamic Config|   Boolean|                                                                      |
|                      Show Commands|   Boolean|                                                         Show Commands|
|                        Show Events|   Boolean|                                                           Show Events|
|                              Watch|   Boolean|                                                           Watch Layer|

===== Bind Layer Real-Time Parameters =====

^                          Parameter^      Type^                                                           Description^
|               Allow Blocking Event|   Boolean|                                                       Blocking Events|
|                            Blocked|   Boolean|                                                     Disable Component|
|                    Debug Log Level|    Number|                                                           Debug Level|
|                        Passthrough|   Boolean|                                         High-to-Low Layer Passthrough|
|                              Watch|   Boolean|                                                           Watch Layer|

===== Bind Layer Functions =====

^                                                    Function^      Type^                                                           Description^
|                            getBindAllowBlockingEvent(layer)|    getter|                                  Get "Allow Blocking Event" Parameter|
|                                       getBindBlocked(layer)|    getter|                                               Get "Blocked" Parameter|
|                                 getBindDebugLogLevel(layer)|    getter|                                       Get "Debug Log Level" Parameter|
|                               getBindDestinationPeer(layer)|    getter|                                      Get "Destination Peer" Parameter|
|                                      getBindNoEvents(layer)|    getter|                                             Get "No Events" Parameter|
|                                   getBindPassthrough(layer)|    getter|                                           Get "Passthrough" Parameter|
|                                         getBindWatch(layer)|    getter|                                                 Get "Watch" Parameter|
|                       getStatsBindAvailableInstances(layer)|    getter|                                   Get "Available Instances" Parameter|
|                     getStatsBindDownstreamLastPacket(layer)|    getter|                                Get "Downstream Last Packet" Parameter|
|                    getStatsBindDownstreamPacketCount(layer)|    getter|                               Get "Downstream Packet Count" Parameter|
|                       getStatsBindMaxDownstreamDelay(layer)|    getter|                                  Get "Max Downstream Delay" Parameter|
|                         getStatsBindMaxUpstreamDelay(layer)|    getter|                                    Get "Max Upstream Delay" Parameter|
|                      getStatsBindMeanDownstreamDelay(layer)|    getter|                                 Get "Mean Downstream Delay" Parameter|
|                        getStatsBindMeanUpstreamDelay(layer)|    getter|                                   Get "Mean Upstream Delay" Parameter|
|                       getStatsBindMinDownstreamDelay(layer)|    getter|                                  Get "Min Downstream Delay" Parameter|
|                         getStatsBindMinUpstreamDelay(layer)|    getter|                                    Get "Min Upstream Delay" Parameter|
|                                     getStatsBindName(layer)|    getter|                                                  Get "Name" Parameter|
|                        getStatsBindRateBpsDownstream(layer)|    getter|                                   Get "Rate Bps Downstream" Parameter|
|                          getStatsBindRateBpsUpstream(layer)|    getter|                                     Get "Rate Bps Upstream" Parameter|
|                              getStatsBindTimestampIn(layer)|    getter|                                          Get "Timestamp In" Parameter|
|                             getStatsBindTimestampOut(layer)|    getter|                                         Get "Timestamp Out" Parameter|
|                                     getStatsBindType(layer)|    getter|                                                  Get "Type" Parameter|
|                       getStatsBindUpstreamLastPacket(layer)|    getter|                                  Get "Upstream Last Packet" Parameter|
|                      getStatsBindUpstreamPacketCount(layer)|    getter|                                 Get "Upstream Packet Count" Parameter|
|                  getStatsBindVarianceDownstreamDelay(layer)|    getter|                             Get "Variance Downstream Delay" Parameter|
|                    getStatsBindVarianceUpstreamDelay(layer)|    getter|                               Get "Variance Upstream Delay" Parameter|
|                      setBindAllowBlockingEvent(layer,value)|    setter|                                  Set "Allow Blocking Event" Parameter|
|                                 setBindBlocked(layer,value)|    setter|                                               Set "Blocked" Parameter|
|                           setBindDebugLogLevel(layer,value)|    setter|                                       Set "Debug Log Level" Parameter|
|                                setBindNoEvents(layer,value)|    setter|                                             Set "No Events" Parameter|
|                             setBindPassthrough(layer,value)|    setter|                                           Set "Passthrough" Parameter|
|                                   setBindWatch(layer,value)|    setter|                                                 Set "Watch" Parameter|
Netualizer

User Tools

Site Tools

Page Tools
