Function | Type | Description |
getIpAddress(layer) | getter | Get “Address” Parameter |
getIpAllowBlockingEvent(layer) | getter | Get “Allow Blocking Event” Parameter |
getIpAllowRandomAddresses(layer) | getter | Get “Allow Random Addresses” Parameter |
getIpAvoidL3Overlapping(layer) | getter | Get “Avoid L3 Overlapping” Parameter |
getIpBlocked(layer) | getter | Get “Blocked” Parameter |
getIpDHCP(layer) | getter | Get “DHCP” Parameter |
getIpDebugLogLevel(layer) | getter | Get “Debug Log Level” Parameter |
getIpDestAddress(layer) | getter | Get “Dest Address” Parameter |
getIpDestinationPeer(layer) | getter | Get “Destination Peer” Parameter |
getIpLoopback(layer) | getter | Get “Loopback” Parameter |
getIpNoEvents(layer) | getter | Get “No Events” Parameter |
getIpOSICMP(layer) | getter | Get “OS ICMP” Parameter |
getIpPassthrough(layer) | getter | Get “Passthrough” Parameter |
getIpProtocol(layer) | getter | Get “Protocol” Parameter |
getIpRange(layer) | getter | Get “Range” Parameter |
getIpSkip(layer) | getter | Get “Skip” Parameter |
getIpState(layer) | getter | Get “State” Parameter |
getIpWatch(layer) | getter | Get “Watch” Parameter |
getStatsIpAvailableInstances(layer) | getter | Get “Available Instances” Parameter |
getStatsIpDownstreamLastPacket(layer) | getter | Get “Downstream Last Packet” Parameter |
getStatsIpDownstreamPacketCount(layer) | getter | Get “Downstream Packet Count” Parameter |
getStatsIpInARPPackets(layer) | getter | Get “In ARP Packets” Parameter |
getStatsIpMaxDownstreamDelay(layer) | getter | Get “Max Downstream Delay” Parameter |
getStatsIpMaxUpstreamDelay(layer) | getter | Get “Max Upstream Delay” Parameter |
getStatsIpMeanDownstreamDelay(layer) | getter | Get “Mean Downstream Delay” Parameter |
getStatsIpMeanUpstreamDelay(layer) | getter | Get “Mean Upstream Delay” Parameter |
getStatsIpMinDownstreamDelay(layer) | getter | Get “Min Downstream Delay” Parameter |
getStatsIpMinUpstreamDelay(layer) | getter | Get “Min Upstream Delay” Parameter |
getStatsIpName(layer) | getter | Get “Name” Parameter |
getStatsIpOutARPPackets(layer) | getter | Get “Out ARP Packets” Parameter |
getStatsIpRateBpsDownstream(layer) | getter | Get “Rate Bps Downstream” Parameter |
getStatsIpRateBpsUpstream(layer) | getter | Get “Rate Bps Upstream” Parameter |
getStatsIpTimestampIn(layer) | getter | Get “Timestamp In” Parameter |
getStatsIpTimestampOut(layer) | getter | Get “Timestamp Out” Parameter |
getStatsIpType(layer) | getter | Get “Type” Parameter |
getStatsIpUpstreamLastPacket(layer) | getter | Get “Upstream Last Packet” Parameter |
getStatsIpUpstreamPacketCount(layer) | getter | Get “Upstream Packet Count” Parameter |
getStatsIpVarianceDownstreamDelay(layer) | getter | Get “Variance Downstream Delay” Parameter |
getStatsIpVarianceUpstreamDelay(layer) | getter | Get “Variance Upstream Delay” Parameter |
ipGet(layer) | function | Get DHCP Address |
ipPing(layer,address) | function | Ping Address |
ipRelease(layer) | function | Release Address |
isEventIpIfDown(event) | event | Interface Down Event |
isEventIpIfUp(event) | event | Interface Up Event |
isIpUp(layer) | getter | Is IP Layer Up? |
isIpv4Address(address) | function | Is IP Adress IPv4? |
isIpv6Address(address) | function | Is IP Adress IPv6? |
setIpAllowBlockingEvent(layer,value) | setter | Set “Allow Blocking Event” Parameter |
setIpAllowRandomAddresses(layer,value) | setter | Set “Allow Random Addresses” Parameter |
setIpAvoidL3Overlapping(layer,value) | setter | Set “Avoid L3 Overlapping” Parameter |
setIpBlocked(layer,value) | setter | Set “Blocked” Parameter |
setIpDebugLogLevel(layer,value) | setter | Set “Debug Log Level” Parameter |
setIpDestAddress(layer,value) | setter | Set “Dest Address” Parameter |
setIpLoopback(layer,value) | setter | Set “Loopback” Parameter |
setIpNoEvents(layer,value) | setter | Set “No Events” Parameter |
setIpOSICMP(layer,value) | setter | Set “OS ICMP” Parameter |
setIpPassthrough(layer,value) | setter | Set “Passthrough” Parameter |
setIpProtocol(layer,value) | setter | Set “Protocol” Parameter |
setIpWatch(layer,value) | setter | Set “Watch” Parameter |
waitForIpUp(layer) | function | Block until IP layer is up |